The humidifier is designed to work together with the Wanas 250, 345, 350, 415, 550 and 615 air handling units. The device is used to maintain the required humidity in the building. Operation is based on the natural process of water evaporation, this process is the most beneficial for our health, in addition, it is very energy-efficient. This solution ensures that the humidity in the building is maintained during the winter, when the humidity is low. A properly installed device does not require any maintenance other than periodic replacement of the evaporation mat.
BENEFITS:
Max. flow rate |
m3/h | 600 | |
Energy consumption |
W | 15 | |
Power supply |
V/Hz | 230/50 | |
Stub pipe diameter | mm | 200 | |
Height/Width/Depth |
mm | 494/455/452,2 |
|
Weight |
kg | 25 | |
Heater power |
W | 1 000 | |
Nominal capacity |
l/h | 2,8 | |
Maximum water consumption |
l/h | 10,1 | |
Air resistance at 200 m3/h |
Pa | 7 | |
Water connector diameter |
cal | 3/4 | |
Water pressure |
MPa | 0,15-0,6 | |
Water temperature |
Min/max | 5-20 | |
Environment temperature |
Min/max | 5-45 | |
Water hardness |
Max mg CaCo3 | 200 |
A – air supply to rooms
B – air supply to humidifier